top of page

23 Series Shock

23 Series Gas Shock is back again after a small pardon from our line of shocks. The 8 thread per inch steel body is a 46 mm honed body, this process of honing and finishing the inside of our bodies allows us to hold tighter tolerance between the piston and body of the shock which gives you a shock that will not fade over the course of the season. This shock removes all the headaches of a coil kit sleeve but may infringe on some of the rules, so it is important that you read and understand your rule package to make sure it is legal for what you want to do. We will do coil over kits in 5” and 2.5” spring cups. The 5” spring cup is standard spring size for this shock.

Features of the 23 Series Shock:

  •    Low drag assembly, which includes the divider, seal and main piston.

  •    Bronze coated Teflon wearband, reduces friction and increase sealing.

  •    Honed and coated tube ID.

  •    Shim technology.

  •    High flow linear piston design.

  •    Coil over kit # 23-9090-16

Shock Valving

Shocks can be valved in any configuration or in standard valving, also see Shock We Build to get a better understanding of the shocks we build.

Standard builds would be 4040 which is a 4 rebound and a 4 compression, see valving chart to see pressures at 10 inch per second.

Custom builds will be more like RF1-50 +130

$230.00 ea

23-9090-16    5" Spring Kit         $48.20

23-9090-17    2.5" Spring Kit      $53.20

23-9090-7-9.png
23-9090-16.png
bottom of page